🔍 Composition & Manufacturing

Made from a homogeneous mixture of Portland cement, treated cellulose fibres, silica, and mineral fillers; 100% asbestos‑free, cured using high-pressure steam (HPSC/autoclave process) for maximum strength and durability

Offered in two main variants:

Standard / Multi-purpose Boards: Density > 1250 kg/m³, Type B Category III

SuperHD Heavy-Duty Boards: Higher density > 1450–1500 kg/m³, Type A Category IV

✅ Key Features

Fire Resistant: Non‑combustible (Reaction to Fire A1/A2‑s1‑d0 per EN 13501‑1; BS 476)

Moisture & Weather Resistant: Less than 26–30% water absorption; performs well in wet and humid zones

Termite & Pest Proof: Completely resistant to decay, rot, and insect damage

Impact Resistant: Withstands point loads of >45 kg and retains shape under wind and load stress

Acoustic Insulation: STC ~30–35 dB (9 mm thickness) depending on board type

Thermal Properties: Thermal conductivity ~0.22 W/m·K at 50 °C, helping reduce heat transfer

Dimensional Stability: Minimal shrinkage or expansion under moisture and temperature variations

Workability & Fast Install: Can be cut, nailed, screwed; less carpentry required; ideal for dry construction; finishing-ready surface .

Eco-Friendly & GreenPro Certified: Contains up to 35% recycled content; helps earn LEED/Griha credits; low carbon manufacturing

📐 Available Sizes & Thickness

Board Dimensions: Primarily 1220 × 2440 mm (4 × 8 ft), also available in 1220 × 1220, 1830 × 1220, 3050 × 1220 mm depending on variant

Thickness Options:

Standard variant: 6–20 mm (common: 6, 8, 10, 12, 16, 18, 20 mm)

SuperHD variant: 6, 9, 12, 15 mm typical

🏗 Applications & Uses

External Applications

Cladding & Exterior Facades

External Ceilings & Soffits

Roof Tile Underlay for terraces and pitched roofs

Wet‑zone exterior lining (e.g. balconies, outdoor bathrooms)

Pre-fab wall panels, fences & gates

Building envelopes exposed to moisture and wind pressure

Internal Applications

Drywall Partitions in homes, offices, schools, hospitals

Internal wall lining for bathrooms, kitchens, corridors

False ceilings & duct encasements

Medium and light-duty flooring substrate (mezzanine, under‑tile base)

RCC beam/column encasements and structural backing for tiles or cladding

Large-format tile & stone subbase for renovation and finishing projects

✅ Why Choose Everest Fibre Cement Boards?

Robust, long-lasting and low-maintenance

Fireproof, moisture‑resistant, termite‑safe and eco‑certified

Quick installation via dry‑fix method; fewer errors on site

Suitable for interiors and exteriors, structural and decorative use

A sustainable alternative to bricks, AAC, gypsum, or ACP panels